Dial - Smart Rotary Knob with Touch Screen specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, BOOT0, D0 |
| GPIO1 | PORTB_IN, D1, A1 |
| GPIO2 | PORTB_OUT, D2, A2 |
| GPIO3 | SPEAKER |
| GPIO4 | TFT_DC |
| GPIO5 | MOSI |
| GPIO6 | SCK |
| GPIO7 | TFT_CS |
| GPIO8 | TFT_RESET |
| GPIO9 | TFT_BACKLIGHT |
| GPIO10 | RFID_IRQ |
| GPIO11 | SDA |
| GPIO12 | SCL |
| GPIO13 | PORTA_SDA, D13 |
| GPIO14 | TOUCH_IRQ |
| GPIO15 | PORTA_SCL, D15 |
| GPIO21 | NEOPIXEL |
| GPIO40 | ENC_B |
| GPIO41 | ENC_A |
| GPIO42 | KNOB_BUTTON |
| GPIO46 | POWER_HOLD |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.