Board

NHB Systems JL401-S3 4MB Flash 2MB PSRAM specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

31 pins
Pin names in firmware (31 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON, BOOT0, D0
GPIO1NEOPIXEL
GPIO2NEOPIXEL_POWER
GPIO3SD_PWR, D3
GPIO4D4
GPIO5D5
GPIO6D6
GPIO7D7
GPIO8A5, D8
GPIO9D9
GPIO10D10
GPIO11MOSI, D11
GPIO12SCK, D12
GPIO13LED, L, MISO, D13
GPIO14I2C_POWER, A4, D14
GPIO15A3, D15
GPIO16A2, D16
GPIO17A1, D17
GPIO18A0, D18
GPIO21D21
GPIO33D33
GPIO34D34
GPIO35D35
GPIO36D36
GPIO37D37
GPIO38D38
GPIO39D39
GPIO43TX, D43
GPIO44RX, D44
GPIO47SDA
GPIO48SCL

Sources

2 sources
  1. CircuitPython board definition (nhbsystems_jl401_4mbflash_2mbpsram) at 83b54473a1
  2. CircuitPython pin definitions (nhbsystems_jl401_4mbflash_2mbpsram) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake