Pcbcupid GLYPH S3 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| GPIO1 | A1, D1 |
| GPIO2 | A2, D2 |
| GPIO4 | SDA, D4 |
| GPIO5 | SCL, D5 |
| GPIO6 | A6, D6 |
| GPIO7 | A7, D7 |
| GPIO8 | A8, D8 |
| GPIO9 | A9, D9 |
| GPIO10 | A10, D10 |
| GPIO13 | D13 |
| GPIO14 | D14 |
| GPIO15 | D15 |
| GPIO16 | D16 |
| GPIO17 | D17 |
| GPIO18 | D18 |
| GPIO21 | LED |
| GPIO35 | SCK |
| GPIO36 | MOSI |
| GPIO37 | MISO |
| GPIO43 | TX |
| GPIO44 | RX |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.