Board

AI-On-The-Edge-Cam specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

31 pins
Pin names in firmware (31 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0
GPIO1ETH_MOSI, IO1
GPIO2IO2
GPIO3SD_CS, IO3
GPIO4SDA, CAMERA_SIOD
GPIO5SCL, CAMERA_SIOC
GPIO6CAMERA_VSYNC
GPIO7CAMERA_HREF
GPIO8CAMERA_DATA4
GPIO9CAMERA_DATA3
GPIO10CAMERA_DATA5
GPIO11CAMERA_DATA2
GPIO12NEOPIXEL, IO12
GPIO13CAMERA_PCLK
GPIO14ETH_MISO, IO14
GPIO15CAMERA_XCLK
GPIO16CAMERA_DATA9
GPIO17CAMERA_DATA8
GPIO18CAMERA_DATA7
GPIO21ETH_CLK, IO21
GPIO38ETH_INT, IO38
GPIO39ETH_CS, IO39
GPIO40SD_CLK, IO40
GPIO41SD_MISO, IO41
GPIO42SD_MOSI, IO42
GPIO43TX, IO43
GPIO44RX, IO44
GPIO45ETH_RST, IO45
GPIO46IO46, PER_EN
GPIO47CAMERA_DATA6
GPIO48LED, IO48

Sources

2 sources
  1. CircuitPython board definition (prokyber_ai_on_the_edge_cam) at 83b54473a1
  2. CircuitPython pin definitions (prokyber_ai_on_the_edge_cam) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake