Seeed Studio XIAO ESP32-S3 TRMNL DIY Kit specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (20 pins)
| Chip pin | Board names |
|---|---|
| GPIO1 | BAT_ADC |
| GPIO2 | BTN1 |
| GPIO3 | BTN2 |
| GPIO4 | EDP_BUSY |
| GPIO5 | BTN3 |
| GPIO6 | ADC_EN |
| GPIO7 | SPI0_CLK |
| GPIO9 | SPI0_MOSI |
| GPIO10 | EDP_DC |
| GPIO11 | SPI1_MOSI |
| GPIO12 | SPI1_MISO |
| GPIO13 | SPI1_CLK |
| GPIO21 | LED |
| GPIO38 | EDP_RES |
| GPIO39 | SPI1_CS0 |
| GPIO40 | SPI1_CS1 |
| GPIO41 | D14, RX |
| GPIO42 | D15, TX |
| GPIO43 | PWR_EN |
| GPIO44 | SPI0_CS |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.