Seeed Studio XIAO ESP32C6 specs, pinout & datasheets
- Chip / SoC
- ESP32-C6
- Clock
- 160 MHz
Imported entry: generated from open-source board definitions (platformio, zephyr, circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- MicroPython
- Supported[4]
- CircuitPython
- Supported[3]
- Zephyr RTOS
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (16 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | D0, A0 |
| GPIO1 | D1, A1 |
| GPIO2 | D2, A2 |
| GPIO4 | A4, MTMS, LP_UART_RXD |
| GPIO5 | A5, MTDI, LP_UART_TXD |
| GPIO6 | A6, MTCK, LP_I2C_SDA |
| GPIO7 | MTDO, LP_I2C_SCL |
| GPIO15 | LED, LED_INVERTED |
| GPIO16 | D6, TX |
| GPIO17 | D7, RX |
| GPIO18 | D10, MOSI |
| GPIO19 | D8, SCK |
| GPIO20 | D9, MISO |
| GPIO21 | D3 |
| GPIO22 | D4, SDA |
| GPIO23 | D5, SCL |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.