Board

senseBox MCU Eye specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0BUTTON, BOOT0
GPIO1SCL, D1
GPIO2SDA, D2
GPIO3SD_ENABLE
GPIO4CAM_SDA
GPIO5CAM_SCL
GPIO6CAM_VSYNC
GPIO7CAM_HREF
GPIO8CAM_D2
GPIO9CAM_D1
GPIO10CAM_D3
GPIO11CAM_D0
GPIO12CAM_D4
GPIO13CAM_PCLK
GPIO14A14, D14
GPIO15CAM_XCLK
GPIO16CAM_D7
GPIO17CAM_D6
GPIO18CAM_D5
GPIO21BUTTON_SW
GPIO26UART_ENABLE
GPIO38SD_MOSI
GPIO39SD_SCLK
GPIO40SD_MISO
GPIO41SD_CS
GPIO43TX
GPIO44RX
GPIO45LED, NEOPIXEL
GPIO46PWDN
GPIO48A48, D48

Sources

2 sources
  1. CircuitPython board definition (sensebox_mcu_eye_esp32s3) at 83b54473a1
  2. CircuitPython pin definitions (sensebox_mcu_eye_esp32s3) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake