Board

Thing Plus - RP2350 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

2 platforms
MicroPython
Supported[2]
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Datasheets and documents

1 documents

Pinout

27 pins
Pin names in firmware (27 pins)
From the firmware’s board definition[3]
Chip pinBoard names
CYW0LED
CYW2VBUS_SENSE
GPIO0TX, D0
GPIO1RX, D1
GPIO2SCK, D2
GPIO3MOSI, D3
GPIO4MISO, D4
GPIO5D5
GPIO6SDA, D6
GPIO7SCL, D7
GPIO9D9
GPIO10D10
GPIO11D11
GPIO12D12
GPIO13D13
GPIO14NEOPIXEL, D14
GPIO15D15
GPIO16D16
GPIO17D17
GPIO18D18
GPIO19D19
GPIO20D20
GPIO21D21
GPIO22D22
GPIO26A0, D26
GPIO27A1, D27
GPIO28A2, D28

Sources

3 sources
  1. CircuitPython board definition (sparkfun_thing_plus_rp2350) at 83b54473a1
  2. MicroPython board definition (SPARKFUN_THINGPLUS_RP2350) at 19e685eca9
  3. CircuitPython pin definitions (sparkfun_thing_plus_rp2350) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake