Sunton ESP32-8048S050 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (17 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | IO0, BOOT0, BUTTON, I2S_BIT_CLOCK |
| GPIO2 | TFT_BACKLIGHT |
| GPIO10 | SD_CS |
| GPIO11 | IO11, MOSI |
| GPIO12 | IO12, SCK |
| GPIO13 | IO13, MISO |
| GPIO17 | IO17, I2S_DATA |
| GPIO18 | IO18, I2S_WORD_SELECT, TOUCH_INT |
| GPIO19 | IO19, SDA |
| GPIO20 | IO20, SCL |
| GPIO38 | TOUCH_RESET, TOUCH_CS |
| GPIO39 | hsync |
| GPIO40 | de |
| GPIO41 | vsync |
| GPIO42 | dclk |
| GPIO43 | TX |
| GPIO44 | RX |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.