Board

Unexpected Maker EdgeS3[D] specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

28 pins
Pin names in firmware (28 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0IO0, D0
GPIO1IO1, A0, D1
GPIO2IO2, A1, D2
GPIO3IO3, A2, D3
GPIO4IO4, A3, D4
GPIO5IO5, A4, D5
GPIO6IO6, FG_INT
GPIO7IO7, A6, D7
GPIO8SDA, IO8, A7, D8
GPIO9SCL, IO9, A8, D9
GPIO10IO10, A9, D10
GPIO11IO11, A10, D11
GPIO12IO12, A11, D12
GPIO13IO13, A12, D13
GPIO14IO14, A13, D14
GPIO15IO15, A14, D15
GPIO16IO16, A15, D16
GPIO17IO17, A16, D17
GPIO18IO18, A17, D18
GPIO21IO21, D21
GPIO39IO39, D39, MTCK
GPIO40IO40, D40, MTDO
GPIO41IO41, D41, MTDI
GPIO42IO42, D42, MTMS
GPIO43IO43, D43, TX
GPIO44IO44, D44, RX
GPIO45IO45, D45
GPIO46IO46, D46

Sources

2 sources
  1. CircuitPython board definition (unexpectedmaker_edges3d) at 83b54473a1
  2. CircuitPython pin definitions (unexpectedmaker_edges3d) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake