Unexpected Maker OMGS3 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- MicroPython
- Supported[2]
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (21 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | IO0, D0 |
| GPIO1 | IO1, A0, D1 |
| GPIO2 | IO2, A1, D2 |
| GPIO3 | IO3, A2, D3 |
| GPIO4 | IO4, A3, D4 |
| GPIO5 | IO5, A4, D5 |
| GPIO6 | IO6, A5, D6 |
| GPIO7 | IO7, A6, D7 |
| GPIO8 | SDA, IO8, A7, D8 |
| GPIO9 | SCL, IO9, A8, D9 |
| GPIO10 | IO10, A9, D10 |
| GPIO11 | IO11, A10, D11 |
| GPIO12 | IO12, A11, D12 |
| GPIO13 | IO13, A12, D13 |
| GPIO14 | IO14, A13, D14 |
| GPIO21 | IO21, FG_INT |
| GPIO33 | VBUS, VBUS_SENSE |
| GPIO34 | NEOPIXEL_POWER |
| GPIO35 | NEOPIXEL |
| GPIO43 | IO43, D43, TX |
| GPIO44 | IO44, D44, RX |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.