Unexpected Maker RGBTouch Mini specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- MicroPython
- Supported[2]
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (14 pins)
| Chip pin | Board names |
|---|---|
| GPIO7 | IO7, INT_IMU |
| GPIO8 | SDA, IO8 |
| GPIO9 | SCL, IO9 |
| GPIO15 | IO15, INT_ROW |
| GPIO16 | IO16, INT_COL |
| GPIO18 | IO18, VBAT_SENSE |
| GPIO21 | IO21, PWR_SHUTDOWN |
| GPIO34 | IO34, AMP_SD |
| GPIO35 | IO35, AMP_DATA |
| GPIO36 | IO36, AMP_BCLK |
| GPIO37 | IO37, AMP_LRCLK |
| GPIO38 | MATRIX_POWER |
| GPIO39 | MATRIX_DATA |
| GPIO48 | IO48, VBUS_SENSE |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.