Unexpected Maker TinyWATCH S3 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython, micropython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- MicroPython
- Supported[2]
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (25 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | IO0, USER_BUTTON |
| GPIO1 | I2S_MIC_DATA |
| GPIO2 | I2S_MIC_BCLK |
| GPIO3 | I2S_MIC_WS |
| GPIO4 | RTC_INT |
| GPIO5 | SDA2 |
| GPIO6 | BMI_INT1 |
| GPIO7 | BMI_INT2 |
| GPIO8 | SDA |
| GPIO9 | SCL |
| GPIO10 | SCL2 |
| GPIO11 | TOUCH_INT |
| GPIO12 | TOUCH_RESET |
| GPIO13 | TFT_BACKLIGHT |
| GPIO14 | FG_ALERT |
| GPIO15 | TFT_DC |
| GPIO16 | TFT_CS |
| GPIO17 | TFT_RESET |
| GPIO18 | BUZZER |
| GPIO21 | USER_PWR_SHUTDOWN |
| GPIO33 | EXT_FLASH_CS |
| GPIO34 | VBUS_SENSE |
| GPIO35 | MO |
| GPIO36 | CLK |
| GPIO37 | MI |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.