Board

YD-ESP32-S3 N8R8 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

34 pins
Pin names in firmware (34 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0GPIO0, BOOT
GPIO1GPIO1
GPIO2GPIO2
GPIO3GPIO3
GPIO4GPIO4
GPIO5GPIO5
GPIO6GPIO6
GPIO7GPIO7
GPIO8GPIO8
GPIO9GPIO9
GPIO10GPIO10
GPIO11GPIO11
GPIO12GPIO12
GPIO13GPIO13
GPIO14GPIO14
GPIO15GPIO15
GPIO16GPIO16
GPIO17GPIO17
GPIO18GPIO18
GPIO21GPIO21
GPIO35GPIO35
GPIO36GPIO36
GPIO37GPIO37
GPIO38GPIO38
GPIO39GPIO39
GPIO40GPIO40
GPIO41GPIO41
GPIO42GPIO42
GPIO43GPIO43, TX
GPIO44GPIO44, RX
GPIO45GPIO45
GPIO46GPIO46
GPIO47GPIO47
GPIO48GPIO48, NEOPIXEL

Sources

2 sources
  1. CircuitPython board definition (yd_esp32_s3_n8r8) at 83b54473a1
  2. CircuitPython pin definitions (yd_esp32_s3_n8r8) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake