ESP32-S3 1.47inch Display Development Board specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (16 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BTN, GP0 |
| GPIO14 | GP14, SD_SCK |
| GPIO15 | GP15, SD_MOSI |
| GPIO16 | GP16, SDA, SD_MISO |
| GPIO17 | GP17, SCL |
| GPIO18 | GP18 |
| GPIO21 | GP21, SD_CS |
| GPIO38 | NEOPIXEL, GP38 |
| GPIO39 | GP39, LCD_RST |
| GPIO40 | CLK, GP40, LCD_CLK |
| GPIO41 | GP41, LCD_DC |
| GPIO42 | CS, GP42, LCD_CS |
| GPIO43 | GP43, TX |
| GPIO44 | GP44, RX |
| GPIO45 | MOSI, GP45, LCD_MOSI |
| GPIO48 | GP48, LCD_BACKLIGHT |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.