ESP32-S3-Touch-LCD-1.47 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (23 pins)
| Chip pin | Board names |
|---|---|
| GPIO1 | GPIO1 |
| GPIO2 | GPIO2 |
| GPIO3 | GPIO3 |
| GPIO4 | GPIO4 |
| GPIO5 | GPIO5 |
| GPIO6 | GPIO6 |
| GPIO7 | GPIO7 |
| GPIO8 | GPIO8 |
| GPIO9 | GPIO9 |
| GPIO10 | GPIO10 |
| GPIO11 | GPIO11 |
| GPIO13 | SD_D2 |
| GPIO14 | SD_D3 |
| GPIO15 | SD_CMD |
| GPIO16 | SD_CLK |
| GPIO17 | SD_D0 |
| GPIO18 | SD_D1 |
| GPIO41 | SCL |
| GPIO42 | SDA |
| GPIO43 | TX |
| GPIO44 | RX |
| GPIO47 | TOUCH_RST |
| GPIO48 | TOUCH_IRQ |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.