ESP32S3-TOUCH-LCD-2 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (33 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | IO0, BOOT, BUTTON0, LCD_RESET |
| GPIO1 | LCD_BACKLIGHT |
| GPIO2 | IO2, CAM_D7 |
| GPIO3 | IMU_INT |
| GPIO4 | IO4, CAM_HREF |
| GPIO5 | BATTERY |
| GPIO6 | IO6, CAM_VSYNC |
| GPIO7 | IO7, CAM_D6 |
| GPIO8 | IO8, CAM_XCLK |
| GPIO9 | IO9, CAM_PCLK |
| GPIO10 | IO10, CAM_D5 |
| GPIO11 | IO11, CAM_D3 |
| GPIO12 | IO12, CAM_D0 |
| GPIO13 | IO13, CAM_D1 |
| GPIO14 | IO14, CAM_D4 |
| GPIO15 | IO15, CAM_D2 |
| GPIO16 | IO16, TWI_CLK |
| GPIO17 | IO17, CAM_PWDN |
| GPIO18 | IO18 |
| GPIO19 | IO19 |
| GPIO20 | IO20 |
| GPIO21 | IO21, TWI_SDA |
| GPIO38 | MOSI |
| GPIO39 | SCK |
| GPIO40 | MISO |
| GPIO41 | SD_CS |
| GPIO42 | LCD_DC |
| GPIO43 | TX |
| GPIO44 | RX |
| GPIO45 | LCD_CS |
| GPIO46 | TOUCH_INT |
| GPIO47 | IO47, SCL |
| GPIO48 | IO48, SDA |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.