ESP32S3-TOUCH-LCD-2.8 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (32 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BOOT, BUTTON0 |
| GPIO1 | TP_SDA, SDA |
| GPIO2 | TP_RST |
| GPIO3 | TP_SCL, SCL |
| GPIO4 | TP_INT |
| GPIO5 | LCD_BL |
| GPIO6 | BAT_PWR, KEY_BAT |
| GPIO7 | BAT_CONTROL |
| GPIO8 | BAT_ADC |
| GPIO10 | IMU_SCL, I2C_SCL, IO10 |
| GPIO11 | IMU_SDA, I2C_SDA, IO11 |
| GPIO12 | IMU_INT2 |
| GPIO13 | IMU_INT1 |
| GPIO14 | SD_SCK |
| GPIO15 | IO15 |
| GPIO16 | SD_MISO |
| GPIO17 | SD_MOSI |
| GPIO18 | IO18 |
| GPIO19 | IO19 |
| GPIO20 | IO20 |
| GPIO21 | SD_CS |
| GPIO38 | I2S_LRCK |
| GPIO39 | LCD_RST |
| GPIO40 | LCD_SCK, SCK |
| GPIO41 | LCD_DC |
| GPIO42 | LCD_CS |
| GPIO43 | TX, IO43 |
| GPIO44 | RX, IO44 |
| GPIO45 | LCD_MOSI, MOSI |
| GPIO46 | LCD_MISO, MISO |
| GPIO47 | I2S_DIN |
| GPIO48 | I2S_BCK |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.