RP2350-Touch-LCD-1.28 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (30 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | GP0 |
| GPIO1 | GP1 |
| GPIO2 | GP2 |
| GPIO3 | GP3 |
| GPIO4 | GP4 |
| GPIO5 | GP5 |
| GPIO6 | IMU_SDA, GP6 |
| GPIO7 | IMU_SCL, GP7 |
| GPIO8 | LCD_DC, GP8 |
| GPIO9 | LCD_CS, GP9 |
| GPIO10 | LCD_CLK, GP10 |
| GPIO11 | LCD_DIN, GP11 |
| GPIO12 | GP12 |
| GPIO13 | LCD_RST, GP13 |
| GPIO14 | GP14 |
| GPIO15 | GP15 |
| GPIO16 | GP16 |
| GPIO17 | GP17 |
| GPIO18 | GP18 |
| GPIO19 | GP19 |
| GPIO20 | GP20 |
| GPIO21 | GP21 |
| GPIO22 | GP22 |
| GPIO23 | IMU_INT1, GP23 |
| GPIO24 | IMU_INT2, GP24 |
| GPIO25 | LCD_BL, GP25 |
| GPIO26 | GP26_A0, GP26, A0 |
| GPIO27 | GP27_A1, GP27, A1 |
| GPIO28 | GP28_A2, GP28, A2 |
| GPIO29 | A3, BAT_ADC |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.