WEMOS LOLIN S3 specs, pinout & datasheets
- Chip / SoC
- ESP32-S3
- Clock
- 240 MHz
Imported entry: generated from open-source board definitions (platformio, circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- Arduino framework
- Supported[1]Arduino framework available through PlatformIO.
- CircuitPython
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (31 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, BOOT0, IO0, D0 |
| GPIO1 | IO1, A0, D1 |
| GPIO2 | IO2, A1, D2 |
| GPIO3 | IO3, A2, D3 |
| GPIO4 | IO4, A3, D4 |
| GPIO5 | IO5, A4, D5 |
| GPIO6 | IO6, A5, D6 |
| GPIO7 | IO7, A6, D7 |
| GPIO8 | IO8, A7, D8 |
| GPIO9 | IO9, A8, D9 |
| GPIO10 | IO10, A9, D10 |
| GPIO11 | IO11, MOSI, A10, D11 |
| GPIO12 | IO12, SCK, A11, D12 |
| GPIO13 | IO13, MISO, A12, D13 |
| GPIO14 | IO14, A13, D14 |
| GPIO15 | IO15, A14, D15 |
| GPIO16 | IO16, A15, D16 |
| GPIO17 | IO17, A16, D17 |
| GPIO18 | IO18, A17, D18 |
| GPIO21 | IO21, D21 |
| GPIO38 | IO38, D38, NEOPIXEL |
| GPIO39 | IO39, D39 |
| GPIO40 | IO40, D40 |
| GPIO41 | IO41, SCL, D41 |
| GPIO42 | IO42, SDA, D42 |
| GPIO43 | IO43, D43, TX |
| GPIO44 | IO44, D44, RX |
| GPIO45 | IO45 |
| GPIO46 | IO46 |
| GPIO47 | IO47 |
| GPIO48 | IO48 |
Projects from the archive
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.