Adafruit QT Py ESP32 Pico specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (16 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | BUTTON, BOOT0, D0 |
| GPIO4 | SDA, D7, A4 |
| GPIO5 | NEOPIXEL |
| GPIO7 | RX, D16, A7 |
| GPIO8 | NEOPIXEL_POWER |
| GPIO12 | MISO, D37 |
| GPIO13 | MOSI, D35 |
| GPIO14 | SCK, D36 |
| GPIO15 | A3, D8 |
| GPIO19 | SCL1, D40 |
| GPIO22 | SDA1, D41 |
| GPIO25 | A1, D17 |
| GPIO26 | A0, D18 |
| GPIO27 | A2, D9 |
| GPIO32 | TX, D5, A6 |
| GPIO33 | SCL, D6, A5 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.