PyCubedv05 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (38 pins)
| Chip pin | Board names |
|---|---|
| PA02 | DAC0 |
| PA04 | EN_RF |
| PA05 | AIN5 |
| PA06 | BATTERY |
| PA07 | L1PROG |
| PA12 | MOSI |
| PA13 | SCK |
| PA14 | MISO |
| PA15 | BURN2 |
| PA16 | PA16, RX2, SCL2 |
| PA17 | PA17, TX2, SDA2 |
| PA18 | VBUS_RST |
| PA19 | PA19 |
| PA20 | PA20 |
| PA21 | NEOPIXEL |
| PA22 | PA22 |
| PA23 | WDT_WDI |
| PA27 | SD_CS |
| PB00 | RF1_RST |
| PB01 | EN_GPS |
| PB02 | TX |
| PB03 | RX |
| PB04 | RF1_IO4 |
| PB05 | RF1_IO0 |
| PB06 | RF2_IO0 |
| PB07 | RF2_IO4 |
| PB08 | CHRG |
| PB09 | RF2_CS |
| PB12 | SDA |
| PB13 | SCL |
| PB14 | RF2_RST |
| PB15 | RELAY_A |
| PB16 | PB16 |
| PB17 | PB17 |
| PB22 | PB22 |
| PB23 | PB23 |
| PB30 | RF1_CS |
| PB31 | BURN1 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.