Seeeduino Wio Terminal specs, pinout & datasheets
- Chip / SoC
- ATSAMD51J19
- CPU
- Arm Cortex-M4
- Clock
- 120 MHz
Imported entry: generated from open-source board definitions (platformio, circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.
Can I still use it?
- Arduino framework
- Supported[1]Arduino framework available through PlatformIO.
- CircuitPython
- Supported[2]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Datasheets and documents
Pinout
Pin names in firmware (27 pins)
| Chip pin | Board names |
|---|---|
| PA04 | A6, D6 |
| PA06 | A8, D8 |
| PA07 | A2, D2 |
| PA12 | GYROSCOPE_SCL |
| PA13 | GYROSCOPE_SDA |
| PA15 | D13, LED |
| PA16 | D10, SCL |
| PA17 | D9, SDA |
| PB00 | MISO |
| PB01 | CS |
| PB02 | MOSI |
| PB03 | SCK |
| PB04 | A3, D3 |
| PB05 | A4, D4 |
| PB06 | A5, D5 |
| PB07 | A7, D7 |
| PB08 | A0, D0 |
| PB09 | A1, D1 |
| PB21 | TFT_CS |
| PB26 | TX |
| PB27 | RX |
| PC05 | TFT_BACKLIGHT |
| PC06 | TFT_DC |
| PC07 | TFT_RESET |
| PC19 | SD_CS |
| PC21 | GYROSCOPE_INT |
| PD21 | SD_DET |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.