TG-Watch specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (37 pins)
| Chip pin | Board names |
|---|---|
| P0_02 | _A4 |
| P0_03 | _A5 |
| P0_04 | SMC_RST, _A0 |
| P0_05 | _A1 |
| P0_06 | CHRG_STAT, _D11 |
| P0_07 | BACKLIGHT, _D6 |
| P0_08 | BAT_INT, _D12 |
| P0_09 | _NFC1 |
| P0_10 | _NFC2, _D2 |
| P0_11 | SCL |
| P0_12 | SDA |
| P0_13 | MOSI |
| P0_14 | SCK |
| P0_15 | MISO |
| P0_16 | _NEOPIXEL |
| P0_24 | RX |
| P0_25 | TX |
| P0_26 | RTC_RST, _D9 |
| P0_27 | RTC_INT, _D10 |
| P0_28 | _A3 |
| P0_29 | BATTERY_DIV, _VOLTAGE_MONITOR, _BATTERY |
| P0_30 | _A2 |
| P0_31 | AREF |
| P1_01 | TFT_RST |
| P1_02 | _SWITCH |
| P1_03 | CTP_RST |
| P1_04 | VBUS_PRESENT |
| P1_05 | CTP_INT |
| P1_06 | HAPTIC_ENABLE |
| P1_07 | HAPTIC_INT |
| P1_08 | _D5 |
| P1_09 | _D13 |
| P1_10 | ACCEL_INT2 |
| P1_11 | ACCEL_INT1 |
| P1_12 | TFT_DC |
| P1_13 | D21 |
| P1_14 | TFT_CS |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.