Board

WEMOS LOLIN32 specs, pinout & datasheets

Chip / SoC
ESP32
Clock
240 MHz

Imported entry: generated from open-source board definitions (platformio, circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Specifications

3 specs
Chip / SoC
ESP32[1]
Clock
240 MHz[1]
Upload limits
4 MB flash, 320 KB RAM[1]

Upload limits are what a sketch or firmware may use after the bootloader, as the build tools enforce them, not the chip’s full memory.

Can I still use it?

3 platforms
Arduino framework
Supported[1]Arduino framework available through PlatformIO.
CircuitPython
Supported[2]
ESP-IDF
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Datasheets and documents

1 documents

Pinout

23 pins
Pin names in firmware (23 pins)
From the firmware’s board definition[3]
Chip pinBoard names
GPIO0IO0, R11, BOOT
GPIO2IO2, R12
GPIO4IO4, R10
GPIO5IO5
GPIO12IO12, R15
GPIO13IO13, R14
GPIO14IO14, R16
GPIO15IO15, R13
GPIO16IO16
GPIO17IO17
GPIO18IO18
GPIO19IO19
GPIO22IO22, LED
GPIO23IO23
GPIO25IO25, DAC1, R6
GPIO26IO26, DAC2, R7
GPIO27IO27
GPIO32IO32, A1_4, R9
GPIO33IO33, A1_5, R8
GPIO34IO34, A1_6, R4
GPIO35IO35, A1_7, R5
GPIO36VP
GPIO39VN

Sources

3 sources
  1. PlatformIO board definition (lolin32) at 1152c8f691
  2. CircuitPython board definition (wemos_lolin32_lite) at 83b54473a1
  3. CircuitPython pin definitions (wemos_lolin32_lite) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake