The Frood specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (27 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | D0, TX |
| GPIO1 | D1, RX |
| GPIO2 | SDA, D2 |
| GPIO3 | SCL, D3 |
| GPIO4 | D4 |
| GPIO5 | D5 |
| GPIO6 | D6 |
| GPIO7 | D7 |
| GPIO8 | D8 |
| GPIO9 | D9 |
| GPIO10 | D10 |
| GPIO11 | D11 |
| GPIO12 | D12 |
| GPIO13 | D13 |
| GPIO14 | D14 |
| GPIO15 | D15 |
| GPIO16 | D16 |
| GPIO17 | LED, D17 |
| GPIO19 | VBUS_SENSE, D19 |
| GPIO20 | MISO, D20 |
| GPIO21 | D21 |
| GPIO22 | SCK, D22 |
| GPIO23 | MOSI, D23 |
| GPIO26 | A0, D26 |
| GPIO27 | A1, D27 |
| GPIO28 | A2, D28 |
| GPIO29 | A3, D29 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.