Adafruit MacroPad RP2040 specs, pinout & datasheets
- Chip / SoC
- RP2040
- RAM
- 264 KB
- Flash
- 8 MB
Imported entry: generated from open-source board definitions (zephyr, circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Specifications
Can I still use it?
- CircuitPython
- Supported[2]
- Zephyr RTOS
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (27 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | ENCODER_SWITCH, BUTTON |
| GPIO1 | KEY1 |
| GPIO2 | KEY2 |
| GPIO3 | KEY3 |
| GPIO4 | KEY4 |
| GPIO5 | KEY5 |
| GPIO6 | KEY6 |
| GPIO7 | KEY7 |
| GPIO8 | KEY8 |
| GPIO9 | KEY9 |
| GPIO10 | KEY10 |
| GPIO11 | KEY11 |
| GPIO12 | KEY12 |
| GPIO13 | LED |
| GPIO14 | SPEAKER_ENABLE |
| GPIO16 | SPEAKER |
| GPIO17 | ENCODER_A, ROTA |
| GPIO18 | ENCODER_B, ROTB |
| GPIO19 | NEOPIXEL |
| GPIO20 | SDA |
| GPIO21 | SCL |
| GPIO22 | OLED_CS |
| GPIO23 | OLED_RESET |
| GPIO24 | OLED_DC |
| GPIO26 | SCK |
| GPIO27 | MOSI |
| GPIO28 | MISO |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.