USB Interposer specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (14 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | TX, GP0 |
| GPIO1 | RX, GP1 |
| GPIO7 | LED, LED_TOP_RED, GP7 |
| GPIO8 | LED_TOP_AMBER, GP8 |
| GPIO12 | BUTTON, BOOT, GP12 |
| GPIO14 | SDA, GP14 |
| GPIO15 | SCL, GP15 |
| GPIO16 | USB_HOST_DATA_PLUS |
| GPIO17 | USB_HOST_DATA_MINUS |
| GPIO18 | USB_HOST_5V_POWER |
| GPIO22 | LED_BOTTOM_RED, GP22 |
| GPIO23 | LED_BOTTOM_AMBER, GP23 |
| GPIO26 | ADC_VBUS_IN, A0 |
| GPIO27 | ADC_VBUS_OUT, A1 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.