Board

Feather RP2040 SCORPIO specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0D1, TX
GPIO1D0, RX
GPIO2SDA
GPIO3SCL
GPIO4D4, NEOPIXEL
GPIO5D5
GPIO6D6
GPIO7BOOT
GPIO8MISO
GPIO9D9
GPIO10D10
GPIO11D11
GPIO12D12
GPIO13D13, LED
GPIO14SCK
GPIO15MOSI
GPIO16NEOPIXEL0
GPIO17NEOPIXEL1
GPIO18NEOPIXEL2
GPIO19NEOPIXEL3
GPIO20NEOPIXEL4
GPIO21NEOPIXEL5
GPIO22NEOPIXEL6
GPIO23NEOPIXEL7
GPIO24D24
GPIO25D25
GPIO26A0
GPIO27A1
GPIO28A2
GPIO29A3

Sources

2 sources
  1. CircuitPython board definition (adafruit_feather_rp2040_scorpio) at 83b54473a1
  2. CircuitPython pin definitions (adafruit_feather_rp2040_scorpio) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake