Feather RP2040 with USB Type A Host specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (27 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | TX, D1 |
| GPIO1 | RX, D0 |
| GPIO2 | SDA |
| GPIO3 | SCL |
| GPIO4 | D4 |
| GPIO5 | D5 |
| GPIO6 | D6 |
| GPIO7 | BUTTON, BOOT, D7 |
| GPIO8 | MISO |
| GPIO9 | D9 |
| GPIO10 | D10 |
| GPIO11 | D11 |
| GPIO12 | D12 |
| GPIO13 | LED, D13 |
| GPIO14 | SCK |
| GPIO15 | MOSI |
| GPIO16 | USB_HOST_DATA_PLUS |
| GPIO17 | USB_HOST_DATA_MINUS |
| GPIO18 | USB_HOST_5V_POWER |
| GPIO20 | NEOPIXEL_POWER |
| GPIO21 | NEOPIXEL |
| GPIO24 | D24 |
| GPIO25 | D25 |
| GPIO26 | A0 |
| GPIO27 | A1 |
| GPIO28 | A2 |
| GPIO29 | A3 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.