Badger 2040 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (24 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | TX, GP0 |
| GPIO1 | RX, GP1 |
| GPIO3 | INT |
| GPIO4 | SDA |
| GPIO5 | SCL |
| GPIO10 | EN_3V3 |
| GPIO11 | SW_DOWN |
| GPIO12 | SW_A |
| GPIO13 | SW_B |
| GPIO14 | SW_C |
| GPIO15 | SW_UP |
| GPIO16 | MISO |
| GPIO17 | INKY_CS |
| GPIO18 | SCK |
| GPIO19 | MOSI |
| GPIO20 | INKY_DC |
| GPIO21 | INKY_RST |
| GPIO23 | USER_SW |
| GPIO24 | VBUS_DETECT |
| GPIO25 | USER_LED |
| GPIO26 | INKY_BUSY |
| GPIO27 | VREF_POWER |
| GPIO28 | REF_1V2 |
| GPIO29 | VBAT_SENSE |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.