Board

Bradán Lane STUDIO Explorer Badge RP2040 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0GP0, IR_TX
GPIO1GP1, IR_RX
GPIO2GP2, SDA
GPIO3GP3, SCL
GPIO4GP4, LED
GPIO5GP5, NEOPIXEL
GPIO6GP6, SPEAKER
GPIO7GP7, SPEAKER_EN
GPIO8GP8, DISPLAY_EN
GPIO9GP9, SPI_BUSY
GPIO10GP10, SPI_RESET
GPIO11GP11, SPI_DC
GPIO12GP12, SPI_MISO
GPIO13GP13, SPI_CS
GPIO14GP14, SPI_SCK
GPIO15GP15, SPI_MOSI
GPIO16GP16, I2S_DATA
GPIO17GP17, I2S_BCK
GPIO18GP18, I2S_LRCK
GPIO19GP19, TOUCH1
GPIO20GP20, TOUCH2
GPIO21GP21, TOUCH3
GPIO22GP22, TOUCH4
GPIO23GP23, TOUCH5
GPIO24GP24, TOUCH6
GPIO25GP25, TOUCH7
GPIO26GP26, TOUCH8
GPIO27GP27, TOUCH9
GPIO28GP28
GPIO29GP29

Sources

2 sources
  1. CircuitPython board definition (bradanlanestudio_explorer_rp2040) at 83b54473a1
  2. CircuitPython pin definitions (bradanlanestudio_explorer_rp2040) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake