Board

Hack Club Sprig specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0GP0
GPIO1GP1
GPIO2GP2
GPIO3GP3
GPIO4GP4, BLUE_LED
GPIO5GP5, BUTTON_W
GPIO6GP6, BUTTON_A
GPIO7GP7, BUTTON_S
GPIO8GP8, BUTTON_D
GPIO9GP9, AUDIO_DIN
GPIO10GP10, AUDIO_BCLK
GPIO11GP11, AUDIO_LRCLK
GPIO12GP12, BUTTON_I
GPIO13GP13, BUTTON_J
GPIO14GP14, BUTTON_K
GPIO15GP15, BUTTON_L
GPIO16GP16, MISO
GPIO17GP17
GPIO18GP18, SCK
GPIO19GP19, MOSI
GPIO20GP20
GPIO21GP21, CARD_CS
GPIO22GP22
GPIO23SMPS_MODE, GP23
GPIO24VBUS_SENSE, GP24
GPIO25LED, GP25
GPIO26GP26_A0, GP26, A0
GPIO27GP27_A1, GP27, A1
GPIO28GP28_A2, GP28, A2, WHITE_LED
GPIO29A3, VOLTAGE_MONITOR

Sources

2 sources
  1. CircuitPython board definition (hack_club_sprig) at 83b54473a1
  2. CircuitPython pin definitions (hack_club_sprig) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake