SAO Digital Multimeter specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (30 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | UART_TX, TX, GP0 |
| GPIO1 | UART_RX, RX, GP1 |
| GPIO2 | GP2 |
| GPIO3 | GP3 |
| GPIO4 | SAO_SDA, SDA0, GP4 |
| GPIO5 | SAO_SCL, SCL0, GP5 |
| GPIO6 | GP6 |
| GPIO7 | GP7 |
| GPIO8 | GP8 |
| GPIO9 | GP9 |
| GPIO10 | GP10 |
| GPIO11 | GP11 |
| GPIO12 | GP12 |
| GPIO13 | GP13 |
| GPIO14 | DISPLAY_SDA, SDA1, SDA, GP14 |
| GPIO15 | DISPLAY_SCL, SCL1, SCL, GP15 |
| GPIO16 | ENC_A, GP16 |
| GPIO17 | ENC_B, GP17 |
| GPIO18 | BUTTON_FN, BUTTON, GP18 |
| GPIO19 | GP19 |
| GPIO20 | GP20 |
| GPIO21 | GP21 |
| GPIO22 | BUZZER_A, PWM3_A, GP22 |
| GPIO23 | BUZZER_B, PWM3_B, GP23 |
| GPIO24 | GP24 |
| GPIO25 | GP25 |
| GPIO26 | SAO_GPIO1, GP26_A0, GP26, A0 |
| GPIO27 | SAO_GPIO2, GP27_A1, GP27, A1 |
| GPIO28 | MEASURE_RES, GP28_A2, GP28, A2 |
| GPIO29 | MEASURE_VIN, VOLTAGE_MONITOR, GP29_A3, GP29, A3 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.