Board

Challenger RP2040 LoRa specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

29 pins
Pin names in firmware (29 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0SDA, GP0
GPIO1SCL, GP1
GPIO2D5, GP2
GPIO3D6, GP3
GPIO4D9, GP4
GPIO5D10, GP5
GPIO6D11, GP6
GPIO7D12, GP7
GPIO8D13, GP8
GPIO9RFM95W_CS, GP9
GPIO10RFM95W_SCK, GP10
GPIO11RFM95W_SDO, GP11
GPIO12RFM95W_SDI, GP12
GPIO13RFM95W_RST, GP13, D14
GPIO14RFM95W_DIO0, GP14, D15
GPIO15RFM95W_DIO1, GP15, D16
GPIO16D0, TX, GP16
GPIO17D1, RX, GP17
GPIO18RFM95W_DIO2, GP18, D17
GPIO19A4, GP19
GPIO20MISO, GP20
GPIO21A5, GP21
GPIO22SCK, GP22
GPIO23MOSI, GP23
GPIO24LED, GP24, D18
GPIO26A0, GP26
GPIO27A1, GP27
GPIO28A2, GP28
GPIO29A3, GP29

Sources

2 sources
  1. CircuitPython board definition (challenger_rp2040_lora) at 83b54473a1
  2. CircuitPython pin definitions (challenger_rp2040_lora) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake