Challenger RP2040 LTE specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (29 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | SDA, GP0 |
| GPIO1 | SCL, GP1 |
| GPIO2 | D5, GP2 |
| GPIO3 | D6, GP3 |
| GPIO4 | SARA_TX, GP4 |
| GPIO5 | SARA_RX, GP5 |
| GPIO6 | SARA_CTS, GP6 |
| GPIO7 | SARA_RTS, GP7 |
| GPIO8 | D13, GP8 |
| GPIO9 | D12, GP9 |
| GPIO10 | D11, GP10 |
| GPIO11 | D10, GP11 |
| GPIO12 | D9, GP12 |
| GPIO13 | SARA_BTN |
| GPIO14 | SARA_RST |
| GPIO15 | SARA_PWR, GP15 |
| GPIO16 | D0, TX, GP16 |
| GPIO17 | D1, RX, GP17 |
| GPIO19 | LED, GP19 |
| GPIO20 | MISO |
| GPIO21 | A5, GP21 |
| GPIO22 | SCK, GP22 |
| GPIO23 | MOSI, GP23 |
| GPIO24 | GP24 |
| GPIO25 | A4, GP25 |
| GPIO26 | A3, GP26 |
| GPIO27 | A2, GP27 |
| GPIO28 | A1, GP28 |
| GPIO29 | A0, GP29 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.