EncoderPad RP2040 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (20 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | KEY5 |
| GPIO1 | KEY6 |
| GPIO2 | KEY7 |
| GPIO3 | KEY8 |
| GPIO4 | KEY9 |
| GPIO5 | ENCODER_A, ROTA |
| GPIO6 | ENCODER_B, ROTB |
| GPIO8 | SDA |
| GPIO9 | SCL |
| GPIO13 | SPEAKER |
| GPIO14 | KEY1 |
| GPIO15 | NEOPIXEL |
| GPIO18 | KEY2 |
| GPIO19 | KEY3 |
| GPIO20 | KEY4 |
| GPIO25 | LED |
| GPIO26 | SCK |
| GPIO27 | MOSI |
| GPIO28 | MISO |
| GPIO29 | CS |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.