Board

T-Display RP2040 specs, pinout & datasheets

Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.

Can I still use it?

1 platforms
CircuitPython
Supported[1]

As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.

Pinout

30 pins
Pin names in firmware (30 pins)
From the firmware’s board definition[2]
Chip pinBoard names
GPIO0LCD_RESET
GPIO1TX, GP1, LCD_DC
GPIO2RX, GP2, LCD_CLK
GPIO3LCD_MOSI
GPIO4LCD_BACKLIGHT
GPIO5LCD_CS
GPIO6BUTTON0, BUTTON_L, GP6
GPIO7BUTTON1, BUTTON_R, GP7
GPIO8GP8
GPIO9GP9
GPIO10SCK, GP10
GPIO11MOSI, GP11
GPIO12MISO, GP12
GPIO13GP13
GPIO14SDA, GP14
GPIO15SCL, GP15
GPIO16GP16
GPIO17GP17
GPIO18GP18
GPIO19GP19
GPIO20GP20
GPIO21GP21
GPIO22TFT_POWER, GP22
GPIO23GP23
GPIO24GP24
GPIO25LED, GP25
GPIO26VOLTAGE_MONITOR
GPIO27GP27
GPIO28GP28
GPIO29GP29

Sources

2 sources
  1. CircuitPython board definition (lilygo_t_display_rp2040) at 83b54473a1
  2. CircuitPython pin definitions (lilygo_t_display_rp2040) at 395b187017

Spotted a mistake?

Reviewed by hand

Every report is read by a person and checked against a source before anything changes. Please link one if you have it.

Report a mistake