CAST-AWAY RP2040 specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (16 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | D0, SDA |
| GPIO1 | D1, SCL |
| GPIO2 | D2, SCK |
| GPIO3 | D3, MOSI |
| GPIO4 | D4, MISO |
| GPIO5 | D5 |
| GPIO12 | D12 |
| GPIO13 | D13 |
| GPIO14 | D14, RX |
| GPIO15 | D15, TX |
| GPIO16 | D16 |
| GPIO17 | D17 |
| GPIO18 | NEOPIXEL |
| GPIO26 | D26, A0 |
| GPIO27 | D27, A1 |
| GPIO28 | D28, A2 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.