Badger 2040 W (Pico W Aboard) specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (30 pins)
| Chip pin | Board names |
|---|---|
| CYW0 | LED |
| CYW1 | SMPS_MODE |
| CYW2 | VBUS_SENSE |
| GPIO0 | TX, GP0 |
| GPIO1 | RX, GP1 |
| GPIO2 | GP2 |
| GPIO3 | GP3 |
| GPIO4 | SDA |
| GPIO5 | SCL |
| GPIO6 | GP6 |
| GPIO7 | GP7 |
| GPIO8 | RTC_ALARM |
| GPIO9 | GP9 |
| GPIO10 | EN_3V3 |
| GPIO11 | SW_DOWN |
| GPIO12 | SW_A |
| GPIO13 | SW_B |
| GPIO14 | SW_C |
| GPIO15 | SW_UP |
| GPIO16 | MISO |
| GPIO17 | INKY_CS |
| GPIO18 | SCK |
| GPIO19 | MOSI |
| GPIO20 | INKY_DC |
| GPIO21 | INKY_RST |
| GPIO22 | USER_LED |
| GPIO26 | INKY_BUSY |
| GPIO27 | GP27_A1, GP27, A1 |
| GPIO28 | GP28_A2, GP28, A2 |
| GPIO29 | VOLTAGE_MONITOR, A3 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.