Inky Frame 7.3" (Pico W Aboard) specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (29 pins)
| Chip pin | Board names |
|---|---|
| CYW0 | PICO_LED |
| CYW1 | SMPS_MODE |
| CYW2 | VBUS_SENSE |
| GPIO0 | TX |
| GPIO1 | RX |
| GPIO2 | HOLD_SYS_EN |
| GPIO3 | I2C_INT |
| GPIO4 | SDA |
| GPIO5 | SCL |
| GPIO6 | LED_ACT, LED |
| GPIO7 | LED_CONN |
| GPIO8 | BUTTON_CLK |
| GPIO9 | BUTTON_LATCH |
| GPIO10 | BUTTON_OUT |
| GPIO11 | LED_A |
| GPIO12 | LED_B |
| GPIO13 | LED_C |
| GPIO14 | LED_D |
| GPIO15 | LED_E |
| GPIO16 | MISO |
| GPIO17 | INKY_CS |
| GPIO18 | SCLK |
| GPIO19 | MOSI |
| GPIO20 | SD_DAT1 |
| GPIO21 | SD_DAT2 |
| GPIO22 | SD_CS |
| GPIO26 | A0 |
| GPIO27 | INKY_RES |
| GPIO28 | INKY_DC |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.