MicroMod RP2040 Processor specs, pinout & datasheets
Imported entry: generated from open-source board definitions (circuitpython), not reviewed by a person. Each fact links to the definition it came from.
Can I still use it?
- CircuitPython
- Supported[1]
As published by each project, checked weekly. A platform not listed has no published information here, which is not the same as no support.
Pinout
Pin names in firmware (30 pins)
| Chip pin | Board names |
|---|---|
| GPIO0 | UART_TX1, TX |
| GPIO1 | UART_RX1, RX |
| GPIO2 | UART_CTS1, AUD_LRCLK, I2S_WS, PCM_SYNC, PDM_DATA |
| GPIO3 | UART_RTS1, AUD_BCLK, I2S_SCK, PCM_CLK, PDM_CLK |
| GPIO4 | I2C_SDA, SDA |
| GPIO5 | I2C_SCL, SCL |
| GPIO6 | D0 |
| GPIO7 | D1, CAM_TRIG |
| GPIO8 | UART_TX2, I2C_INT |
| GPIO9 | UART_RX2, SDIO_DATA3, SPI_CS1 |
| GPIO10 | SDIO_DATA2, AUD_OUT, I2S_OUT, PCM_OUT, CAM_MCLK |
| GPIO11 | SDIO_DATA1, AUD_IN, I2S_IN, PCM_IN, CAM_PCLK |
| GPIO12 | SDIO_DATA0, SPI_CIPO1, SPI_MISO1 |
| GPIO13 | PWM0 |
| GPIO14 | SDIO_CLK, SPI_SCK1 |
| GPIO15 | SDIO_CMD, SPI_COPI1, SPI_MOSI1 |
| GPIO16 | G0, BUS0 |
| GPIO17 | G1, BUS1 |
| GPIO18 | G2, BUS2 |
| GPIO19 | G3, BUS3 |
| GPIO20 | SPI_CIPO, SPI_MISO, CIPO, MISO, G4, BUS4 |
| GPIO21 | SPI_CS, CS, G5, BUS5 |
| GPIO22 | SPI_SCK, SCK, LED_CLK, G6, BUS6 |
| GPIO23 | SPI_COPI, SPI_MOSI, COPI, MOSI, LED_DAT, G7, BUS7 |
| GPIO24 | AUD_MCLK, PWM1 |
| GPIO25 | LED, G10, ADC_DP, CAM_VSYNC |
| GPIO26 | A0 |
| GPIO27 | A1 |
| GPIO28 | G9, ADC_DM, CAM_HSYNC |
| GPIO29 | BATT_VIN3 |
Sources
Spotted a mistake?
Every report is read by a person and checked against a source before anything changes. Please link one if you have it.